China Rigid Flex PCB Suppliers - Single/Dual-Sided, 4-16 Layers, Complex Multi-Layer Factory Solutions
What is Rigid Flex PCB?
Core Components & Structure
A typical rigid-flex PCB consists of three key parts, layered and bonded together through specialized processes:
Made of traditional rigid substrate materials (e.g., FR-4, a glass-reinforced epoxy resin). These parts provide mechanical stability to support electronic components (such as chips, resistors, capacitors) and ensure structural integrity.
Composed of flexible substrates (common materials include polyimide, PI, or polyester, PET). These parts are thin, lightweight, and can be repeatedly bent, folded, or twisted, allowing the board to adapt to irregular shapes or dynamic environments (e.g., parts that need to open/close or vibrate).
The rigid and flexible sections share internal conductive copper layers (signal traces, power lines, ground planes) that are seamlessly connected. This eliminates the need for wires, connectors, or solder joints between separate rigid and flex boards, reducing failure risks.
Key Advantages
Compared to standalone rigid PCBs or flex PCBs, rigid-flex PCBs offer distinct benefits:
- 💡 Space & Weight Savings: They can be folded to fit into tight, complex enclosures (e.g., foldable phones, wearables), reducing the overall size and weight of electronic devices.
- 🛡️ Enhanced Reliability: Fewer connectors and solder joints mean fewer potential points of failure (e.g., loose connections from vibration or aging), which is critical for high-reliability applications like aerospace equipment.
- ⚙️ Simplified Assembly: Integrating multiple rigid and flex parts into one board streamlines the manufacturing process, reducing assembly time and human error.
- 📶 Improved Performance: Continuous copper traces minimize signal loss and electromagnetic interference (EMI), ensuring stable signal transmission—essential for high-frequency devices.
Common Applications
Rigid-flex PCBs are indispensable in industries where space, reliability, and flexibility are paramount:
Foldable smartphones, smartwatches, laptops, cameras, and earbuds (e.g., the hinge area of foldable phones uses flexible sections to connect rigid display and battery boards).
Satellites, aircraft avionics, and military equipment — they withstand extreme temperatures, vibration, and space constraints.
In-vehicle infotainment systems, sensor modules, and ADAS — adapt to the curved or confined spaces of car interiors.
Portable monitors, implantable devices (e.g., pacemakers), and diagnostic equipment — offer biocompatibility, miniaturization, and durability.
The Types of Rigid Flex PCB
The classification dimensions of Rigid-Flex PCB are numerous. The core classification can be based on structural form, flexible area characteristics, number of layers, and adaptability to application scenarios.
This is the most commonly used classification method. The core basis is the connection mode and layout characteristics of the rigid and flexible areas.
- Single Flexible Zone Rigid-Flex PCB: The entire board has only one continuous flexible zone, with both ends or one end connected to the rigid board. Simple structure, low cost — most common in consumer electronics such as laptop flat cables and headphone circuit boards.
- Multi-Flexible Zone Rigid-Flex PCB: Contains two or more independent flexible zones forming complex structures through series connection of multiple rigid boards. Suitable for industrial sensor modules and multi-camera mobile phone lens modules.
- Three-Dimensional Rigid-Flex PCB: The flexible area achieves bending and twisting in three-dimensional space. Used in UAV fuselage control boards and car instrument panel integrated circuits to maximize 3D space utilization.
- Static Rigid-Flex PCB: The flexible area is only bent and shaped once during assembly, maintaining a fixed form during subsequent use. Core requirement is structural stability after shaping (e.g., foldable phone frames).
- Dynamic Rigid-Flex PCB: The flexible area withstands long-term repeated bending and twisting. Requires extremely high fatigue resistance — typical applications include printer paper feed mechanisms and foldable watch components (must endure tens of thousands of bends without failure).
- Single-Layer Rigid-Flex PCB: Only one layer of conductive copper foil. Simplest structure, lowest cost — suitable for low-complexity circuits such as simple toy control boards and small remote control connection lines.
- Double-Layer Rigid-Flex PCB: Two layers of conductive copper foil with interlayer conduction via vias. Balances cost and practicality — widely used as peripheral modules for smartphones and tablets.
- Multi-Layer Rigid-Flex PCB: ≥4 layers, composed of alternating "rigid layer – flexible layer – rigid layer" superposition. High integration — suitable for satellite circuit boards and precision medical equipment mainboards.
- High-Frequency Rigid-Flex PCB: Adopts flexible substrates with low dielectric constant and low loss (such as PTFE-modified polyimide). Suitable for 5G equipment, radar systems, and satellite communication.
- High-Temperature Resistant Rigid-Flex PCB: Made of high-temperature resistant materials (such as special PI), operating stably from -55°C to 200°C or wider. Used in aero engine peripherals and industrial high-temperature sensors.
- HDI Rigid-Flex PCB: Uses micro-vias and fine line width technologies to enhance line density and reduce board size. Suitable for smartwatches and implantable medical devices such as pacemaker auxiliary circuit boards.
How to Design Rigid Flex PCB?
The design and production of rigid-flex PCBs need to take into account both the structural stability of rigid PCBs and the bending adaptability of flexible PCBs. Design is the core of quality — it must simultaneously address electrical performance, mechanical characteristics, and production feasibility.
- Rigid/Flex Zone Boundary: A transition zone (0.5–1mm) should be reserved at the boundary. Edges of the flexible zone need to be rounded (radius ≥1mm) to reduce stress concentration and prevent cracking.
- Flexible Zone Bending Planning: Minimum bending radius of inner copper foil ≥10× flexible substrate thickness; outer copper foil ≥15×. Avoid overlapping and bending in the flexible zone to prevent circuit damage.
- Component Layout: Heat-generating components should be concentrated in the rigid area. Heavy-duty components (interfaces, sensors) must be fixed in rigid areas with reserved heat dissipation space and fixing holes.
- Line Direction: In the flexible zone, prefer horizontal lines (parallel to bending direction). Minimum line width/spacing ≥0.1mm in flexible areas — slightly larger than in rigid areas.
- Stacking Structure: Multi-layer boards should use symmetrical structures (e.g., "rigid – flex – flex – rigid") to prevent warping. Use flexible adhesive materials (such as acrylic) in the flexible zone.
- Via & Grounding Design: Metallized vias are prohibited in the flexible zone — all vias must remain in the rigid zone, at least 1mm from the flex boundary. Use microstrip or ribbon line structures for high-frequency signal optimization.
- Flexible Substrate: For dynamic bending — choose polyimide (PI) for good fatigue resistance. For static scenarios — polyester (PET) with lower cost. High-frequency equipment should use PTFE-modified PI with low dielectric constant.
- Copper Foil & Covering Film: For flexible areas, use rolled copper foil (good ductility and bending resistance). Cover the flexible zone surface with a flexible PI film, extending 0.2–0.3mm beyond the copper foil for protection and insulation.
Key Points of Manufacturing
The production of rigid-flex PCBs integrates the processes of both rigid and flexible PCBs, requiring additional control over the connection links between rigidity and flexibility.
- Substrate Cleaning: The surface of flexible PI substrates is prone to adsorbing impurities. Remove oil stains and oxide layers through plasma cleaning or chemical treatment to enhance copper foil adhesion. Rigid FR-4 substrates need to be dried and dehumidified to prevent air bubbles during lamination.
- Precise Lamination: Temperature, pressure, and time must be controlled precisely. The stepwise lamination method is adopted — first laminate the flexible layer, then laminate with the rigid layer to ensure tight interlayer bonding.
- High-Precision Exposure: Flexible substrates are prone to stretching. Use special fixtures for fixation during exposure. Adopt UV parallel light exposure machines to control line width error in the flexible zone within ±0.02mm.
- Etching Process Optimization: Use alkaline etching solution for the copper foil in the flexible zone at a slightly lower etching speed than the rigid zone to prevent line breakage. Clean promptly after etching to avoid residual liquid corrosion.
- Flexible Zone Contour Cutting: Process by laser cutting (CO₂ or UV laser) for smooth, burr-free cuts. Control laser power carefully to prevent damage to internal circuits.
- Rigid Zone Forming: Use CNC milling with deburring and chamfering. The rigid/flex boundary needs secondary grinding to ensure smooth transition and reduce stress concentration during bending.
- Surface Treatment: Rigid areas can undergo tin spraying, gold plating, and OSP treatments. The flexible zone surface is protected only by a covering film — high-temperature treatments such as tin spraying are prohibited to prevent base material deformation.
- Full-Process Inspection: Inspect interlayer adhesion (peel test) and line conductivity (flying probe test) during production. Finished products undergo bending tests (dynamic bending simulates tens of thousands of cycles) and high/low temperature environment tests.
| Type | Parameter | Standard | Advanced |
|---|---|---|---|
| RIGID FLEX PCB | Flex Layers | Lamination structure ≤4L; Book structure ≤10L | Lamination structure ≤4L; Book structure ≤12L |
| Max. Panel Size (shipping) | 210MM × 480MM | 460MM × 480MM | |
| FPC Dielectric Thickness | 2MIL, 3MIL, 4MIL | 1MIL | |
| PTH Rigid-Flex Transition Area | ≤1.2MM | ≤1.0MM | |
| Pattern Spacing, Rigid Area to Rigid-Flex Transition Area | ≥1.2MM | ≥0.9MM | |
| Rigid-Flex Structure | Typical structure, Flying tail structure, Multi-flex book structure, Two-flex lamination structure, Single-sided asymmetric structure, Asymmetric structure, etc. | ||
